How to Remove Old Wall Anchors

Pesky old wall anchors are not appealing. So it is only natural to want them removed. But many homeowners are scared to try this task on their own because they are concerned about damaging their drywall. Also totally natural. If you are in the same position right now, you don’t have to fret much longer with your DIY decision. There is a simple step-by-step guide waiting for you below that just might change your mind about removing unwanted wall hangers by yourself!What You’ll Need


Drill Bit (or Set)

Putty Knife

Utility Gloves

Old Towel
Before You Start… It is important to gather all your items and supplies before you start. The gloves will protect your hands from scratches or blisters, while the towel can be laid on the floor below to manage any drywall mess. It is also important to choose the correct drill bit size for the best results. If you do not have a full set of drill bits, simply purchase one that is a couple sizes larger than the opening in the wall anchor. Keep in mind that if you plan to paint the wall you are working on, you will first need to prime the patched areas where the wall anchor holes were. And if you are planning to install new drywall anchors, be sure to buy ones that can be easily removed for future convenience!Step OneRemove the screw from the wall anchor.Step TwoPlace the bit inside the center hole of the wall anchor and begin slowly drilling. Use a drill bit that is two sizes larger than the width of the center hole of the anchor. The bit should sit perfectly outside of the edge of the hole, without slipping inside.Step ThreeOnce you begin drilling, the collar of the wall anchor should break free from the wall and automatically push itself out. Let it fall on the floor so you are not tempted to grab it while the drill is rotating. Be careful not to let the bit push deep into the wall cavity, which can interrupt electrical wiring or plumbing pipes.Step FourPush the residual drywall material back into the hole using your putty knife. You may have to fill this hole in stages for best results.Step FiveSand, prime, and paint!

When you are not comfortable with DIY drywall work, just call a professional for help!